forede® presents the Z41X Flange End Rising Stem (OS&Y) Gate Valve, a premium offering designed to deliver reliable flow control and enhanced operational transparency in a wide array of piping applications.
The hallmark OS&Y rising stem design of this valve provides immediate visual feedback on its operational status, a critical advantage for systems where safety and precise control are paramount. Constructed with a 2CR13 Stainless Steel stem, it exhibits outstanding corrosion and wear resistance. Both the support and body are made from Ductile Iron QT450, ensuring robust durability to handle high-pressure conditions and frequent use. The seal, featuring Ductile Iron QT450 covered by NBR, ensures a tight seal to prevent leakage. Its flange end adheres to ANSI150LB, JIS 10K, and BS 5404 standards, allowing for seamless integration into various systems, while the epoxy red or blue surface finishing offers long-lasting corrosion protection.
Available in sizes ranging from 2 Inch (50 mm) to 16 Inch (400 mm), all models come with flange end connections, an OS&Y valve type, and a working pressure of 1.0/1.6 Mpa, with Red or Blue color options.
Suitable for municipal water supply, industrial fluid handling, and large-scale engineering projects, the Z41X Flange End Rising Stem Gate Valve is produced by forede® with strict quality controls. It is an excellent choice for those who prioritize operational clarity, durability, and broad compatibility in flow control applications.
| Body Material |
Ductile Iron, QT450 |
| Bonnet Material |
Ductile Iron ,OT450 |
| Stem Material |
2 Cr13 Stainless Steel |
| Seal Material |
Ductile Iron , QT450, Coverd By NBR |
| Flange End |
ANSI 150 LB / GB / BS Standard |
| Valve Type |
NRS |
| Working Pressure |
1.6 Mpa |
| Surface Finishing |
Epoxy Red or Blue |
1. Benefit of OS&Y Design
Q: What's the advantage of the "OS&Y (Outside Screw & Yoke)" design in this gate valve?
A: The OS&Y design lets you visually see the stem's movement, so you can tell if the valve is open or closed directly. It also makes maintenance easier, as you can check the gate and seal wear by observing the stem's position.
2. NBR Seal Media Compatibility
Q: What fluids should be avoided with the NBR-coated ductile iron seal?
A: NBR (Nitrile Butadiene Rubber) works well with water, oil, and general industrial fluids. But avoid strong acids, alkalis, ketones, or esters-these can degrade NBR, causing leaks. For such media, use a valve with FKM seals instead.
3. Installation Flow Direction
Q: Does this gate valve have a required flow direction during installation?
A: Gate valves are typically bi-directional (seal both ways). But it's recommended to install according to the "flow arrow" on the valve or the common fluid direction for even gate stress. Ensure the stem is vertical upward for easy operation and visibility.
4. Maintenance Frequency and Key Checks
Q: How often should this valve be maintained, and what parts need focus?
A: Maintain every 3-6 months. Focus on: lubricating the 2CR13 stainless steel stem (use grease), inspecting the NBR seal for cracks/wear, checking flange connections for leaks, and ensuring the handwheel turns smoothly.
5. Sizing for Piping
Q: How to choose the right valve size (e.g., 2 inch vs. 16 inch)?
A: Match the valve size to your pipe's nominal diameter (DN). For a DN50 pipe, choose Z41X-16Q-50 (2 inch); for DN400, choose Z41X-16Q-400 (16 inch). This ensures proper flow and no installation issues.
6. 2CR13 Stem Corrosion Resistance
Q: How does the 2CR13 stainless steel stem hold up in humid environments?
A: 2CR13 stainless steel resists rust well in most humid settings. For coastal or high-moisture areas, clean the stem regularly and apply a stainless-steel protectant to extend its life.
7. Handwheel Operation Torque
Q: Is the handwheel hard to turn, and does torque change with valve size?
A: The handwheel torque depends on the valve size-larger valves (e.g., 16 inch) require more force than smaller ones (e.g., 2 inch). But the design ensures smooth operation; if turning becomes stiff, check for stem corrosion or insufficient lubrication.
8. Epoxy Coating Durability Outdoors
Q: How long does the epoxy red/blue coating last in outdoor conditions?
A: In typical outdoor environments, the epoxy coating lasts 5-8 years. For harsh conditions (e.g., direct sunlight, heavy rain), inspect yearly for chipping. Touch up with matching epoxy paint if damage occurs.
9. Working Pressure Selection
Q: When to use 1.0MPa vs. 1.6MPa working pressure?
A: Choose 1.0MPa for systems with lower pressure demands, and 1.6MPa for higher-pressure applications. Ensure your system's pressure never exceeds the valve's working pressure to avoid damage.
10. Gate Valve vs. Globe Valve Use Cases
Q: When is this gate valve better than a globe valve?
A: Gate valves are ideal for full-open/full-close applications with minimal flow restriction (e.g., main water lines). Globe valves are better for throttling (controlling flow rate) but have higher pressure loss. Use this gate valve when you need bi-directional sealing and low flow resistance.
Dear Customer,
Before ordering, please contact with our sales team to discuss order information.
If you have any other requirements or wanna know more info about our products, welcome to contact as well. Our Sales team and Technical Department are willing to support you.
Audited Supplier 
){kind=link}