Fire Protection Portable Fire Foam Eductor/Inductor for Fire Fighting

• Customization: Available
• Product: Foam Inductor/Foam Eductor
• Material: Aluminum Alloy and Brass
• Model NO.: PHF/A6
• Flow Rate: 240 Lpm ; 360 Lpm
• Surface: Red Painting
• Working Pressure: 0.7 - 1.0MPa
• Foam Solution Ratio: 1% - 6% Adjustable
• Inlet Size: 2.5′′coupling,Storz, Inst,GOST, Machino,etc
• Transport Package: Carton
• Specification: 35*40*40
• Trademark: non
• Origin: China
• HS Code: 8424100000
• Production Capacity: 500sets/Month

Product Description

Product Description

The portable foam inductors can be placed near a portable pump or hydrant outlet, minimising manpower  requirements and leaving the firefighter to concentrate on effective application of the foam to control the fire situation.
It offers a simple accurate method of proportioning when the water supply pressure is reasonably high. Each proportioner is designed for a set water pressure. However, higher or lower inlet pressure results in an increase or decrease in water flow with a change in proportioning.
After the pressure water enters the proportional mixer from the inlet, most of the water is sprayed into the diffusion pipe at a high speed through the nozzle, and a negative pressure area is formed between the nozzle and the diffusion pipe. Enter the diffuser tube and flow out from the outlet; a small part of the pressure water is mixed with the mixed liquid phase flowing out of the diffuser tube through the regulating valve and then flows out from the outlet. Turn the handle of the control valve (side of the mixer) to adjust the mixing ratio of the mixture.

Foam Inductor / Foam Eductor

Features:
 

Main Material: Aluminum Alloy and brass;

Working Pressure: 0.7-1.0MPa;

Surface Finishing: Fire Red Painting;

Coupling : STORZ, John Morris,GOST, Machino,etc.

Detailed Photos

 

Specification

  
 

Technical Parameter
Pressure range	0.7 to 1.0 Mpa
Inlet and outlet size	2.5 inch/65mm
Connection	British-BS336, German-Storz, Russia/Vietnam-GOST,etc
Flow	[email protected], [email protected]
Material	Body in brass,aluminium alloy,and iron.Nozzle in stainless steel

FAQ

Q1. Can I have a sample order?
A: Yes, we welcome sample order to test and check quality. Mixed samples are acceptable.

Q2. What about the lead time?
A:Sample needs 7-15 days, mass production time needs 30-40 weeks for order quantity more than 1 container.

Q3. Do you have any MOQ limit?
A: For conventional products, Low MOQ, OEM products request 30-40days.

Q4. How do you deliver the goods and how long does it take to arrive?
A: We usually deliver mass order by sea and air, delivery time is depended on the carrier,urgent trail order usually deliver by
DHL, UPS, FedEx or TNT. It usually takes 3-5 days to arrive. Railway also optional.

Q5. What is your term and payment?
A: Payment<=1000USD, 100% in advance. Payment>=1000USD, 30% T/T in advance ,balance before shippment.

Q6. Is it OK to OEM ?
A: Yes. Please inform us formally before our production and confirm the design and other requirements firstly .

Q7: Do you offer guarantee for the products?
A: Yes, we offer 1 year warranty to our products.

Order Information

Dear Customer,
 

Before ordering, please contact with our sales team to discuss order information.
 

If you have any other requirements or wanna know more info about our products, welcome to contact as well. Our Sales team and Technical Department are willing to support you.